P0A30
Drive Motor B Temperature Sensor Circuit
P0A30 is the general circuit code for the temperature sensor in the second traction motor (motor B). It is meant for faults the control unit can see on the sensor line but cannot classify as too low, too high or implausible. No manufacturer documents P0A30 publicly; GM two-mode hybrids and Mitsubishi (rear motor of the 2023 Outlander PHEV) use the specific codes P0A31 to P0A33 for the same sensor instead. CARB 1968.2 requires hybrid components whose failure can affect emissions to be monitored for circuit faults. Without a valid winding temperature the motor cannot be protected against overheating, so the system usually cuts electric drive power and lights a hybrid warning.
Possible causes
- Loose, corroded or damaged connector between motor B and its control module high
- Chafed or broken sensor wiring at the drive unit medium
- Thermistor in the motor winding failed (often only replaceable with the motor) medium
- Faulty sensor input in the motor control module low
Symptoms
- Hybrid system warning or check engine light
- Reduced electric drive power
- Motor B temperature missing or implausible in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A30
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.