OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A2E

Drive Motor A Temperature Sensor A Circuit Intermittent

P0A2E flags short jumps or dropouts in the motor A temperature signal that are too brief or too erratic for the low/high checks. Bentley documents it for the Bentayga PHEV and Flying Spur Hybrid 2020-23: the resistance in the sensor crimp changes suddenly at high temperature, and only the sensor has to be replaced, although the engine and gearbox come out to reach it. Audi lists it on the 2021-22 A7 e quattro together with P0A4000 and/or P0A2B00, caused by contact wear in a coupling connector, fixed with new gold-plated pins. Siblings: P0A2C/P0A2D for a steady out-of-range signal, P2DB0 for sensor B. The car shows a MIL or HV warning and may limit electric drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 2E

Possible causes

  • Worn contacts in a coupling connector of the sensor line (Audi A7 e quattro) high
  • Resistance jumps in the sensor crimp at high temperature (Bentley hybrids) medium
  • Chafed or loosely routed sensor wire with intermittent contact low

Symptoms

  • Check engine light or high-voltage warning in the cluster
  • Fault comes and goes, often after hard driving
  • Gearbox or electric drive warning on some models

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A2E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication