P0A29
Hybrid/EV Battery Power Off Circuit High
P0A29 is stored when the voltage on the hybrid battery power-off line sits above its plausible range for longer than allowed, which points to an open line pulled up internally or a short to a supply voltage. No manufacturer explains P0A29 publicly; GM merely names it as a keyword in a generic bulletin on terminal fit. The circuit itself is the hardwired disconnect path that patents describe beside the CAN crash message, and CARB 1968.2 requires monitoring of hybrid components relevant to emissions. Related: P0A28 for a signal too low, P0A27 when the contactors do not follow the command. A stuck-high line can keep the system from powering up or from shutting down correctly.
Possible causes
- Open power-off line or unplugged connector high
- Power-off line shorted to battery voltage medium
- Spread or corroded terminals at the connectors medium
- Faulty input or driver stage in the control module low
Symptoms
- Hybrid system warning light
- Vehicle does not reach ready mode
- High-voltage system stays active after switching off
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0A29
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.