P0A24
Generator Torque Sensor Circuit Low
P0A24 is stored when the voltage from the generator torque sensor stays under its lower diagnostic limit for a calibrated time. Electrically this means the line is pulled toward ground, the sensor supply is missing or the signal wire is broken. The sensor measures torque on the shaft of the engine-driven generator; a Honda patent describes such a sensor inside a hollow generator or motor shaft. No manufacturer documents P0A24 publicly; CARB requires an approved generator monitoring plan. The upper limit is P0A25, implausible but valid readings are P0A23, short dropouts P0A26. Electric generation may be cut back.
Possible causes
- Signal line shorted to ground high
- Sensor supply voltage missing medium
- Sensor electronics failed with output stuck low low
Symptoms
- Hybrid system warning light
- Reduced charging and system power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0A24
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.