P0A22
Generator Torque Sensor Circuit
In series or power-split hybrids a separate electric machine runs as generator, driven by the combustion engine. A Honda patent claims a torque sensor inside the hollow shaft of either the traction motor or this generator. P0A22 is the general circuit fault of the generator torque sensor: the control unit receives no usable signal at all, without a more specific low, high or intermittent pattern. No manufacturer documents P0A22 publicly; CARB requires an approved monitoring plan for the generator system. Related: P0A23 plausibility, P0A24 low, P0A25 high, P0A26 intermittent. Charging and engine-driven power generation may be limited.
Possible causes
- Sensor connector at the generator unplugged, loose or corroded high
- Open circuit in the sensor harness medium
- Generator torque sensor or its electronics failed medium
Symptoms
- Hybrid system warning light
- Reduced battery charging by the engine
- Limited system power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0A22
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.