P0A21
Motor Torque Sensor Circuit Intermittent
Here the torque sensor on the traction motor shaft delivers a signal that drops out or jumps for short moments instead of failing permanently. Such shaft sensors, as in the Honda patent with a sensor inside a hollow motor shaft, sit in an area with strong electromagnetic fields and vibration, so loose terminals, chafed wires and interference are the usual suspects. P0A21 sets when the control unit counts too many implausible signal changes. No manufacturer documents P0A21 publicly; CARB demands an approved drive motor monitor. Steady faults would show as P0A19 or P0A20. The warning may come and go.
Possible causes
- Loose or fretted terminal in the sensor connector high
- Chafed sensor wiring that shorts briefly under vibration medium
- Damaged shield letting inverter noise into the signal low
Symptoms
- Hybrid warning that appears and disappears
- Brief loss of electric assist
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0A21
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.