P0A20
Motor Torque Sensor Circuit High
This code covers the upper electrical limit of a torque sensor fitted to the traction motor shaft, for example the magnetostrictive design inside a hollow output shaft described in a Honda patent. The control unit sets P0A20 when the sensor voltage remains above the valid range for a calibrated time, which points to a short to the supply voltage, an open ground return or a sensor output stuck high. No manufacturer documents P0A20 publicly; CARB requires an approved drive motor monitor. Siblings: P0A19 low, P0A18 implausible torque, P0A21 intermittent, P0A17 general circuit. Expect a hybrid warning and limited electric torque.
Possible causes
- Signal line shorted to sensor supply or battery voltage high
- Open sensor ground return medium
- Sensor electronics output stuck high low
Symptoms
- Hybrid system warning light
- Electric drive torque limited
- Reduced acceleration in electric mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0A20
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.