P0A1D
Hybrid/EV Powertrain Control Module A
The hybrid powertrain control module coordinates engine, motors and battery. P0A1D says this module has reported an internal failure or is no longer working reliably. In GM hybrid tables (2013) the engine control module stores P0A1D when a message from motor control processor A signals a hybrid controller status failure in 3 of 4 counts, as a Type B code with MIL after two trips. GM 2016 tables list P0A1D among codes that limit engine power. Subaru warns for the 2014-16 Crosstrek Hybrid that generic OBD readouts may store P0A1D from a scan tool communication error; replace the module only if the code returns. P0E43 covers module B.
Possible causes
- Internal fault of the hybrid control module high
- Code stored by a scan tool communication error, not by a real defect medium
- Supply, ground or network fault at the module low
Symptoms
- MIL and hybrid warning on
- Engine power reduced
- Hybrid functions limited or unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A1D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.