P0A1C
Drive Motor B Control Module Performance
P0A1C is the counterpart of P0A1B for the second electric machine, drive motor B, and reports that its control processor is no longer trustworthy. GM hybrid tables use it for the motor control processor B: in 2016 calibrations the code sets when an inhibit path test at power-down fails three or more times, in 2011 calibrations internal processor integrity faults such as SPI, RAM or cache errors are counted. Both are Type A with MIL on the first trip. The code concerns the control electronics, not a phase current sensor; those faults use their own codes. Expect a hybrid warning and loss of the affected motor function.
Possible causes
- Internal processor or memory fault on the motor B control board high
- Calibration or software fault in the inverter medium
- Unstable 12 V supply or ground to the inverter electronics low
Symptoms
- Hybrid warning and MIL
- Reduced drive power or no electric drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A1C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.