P0A1B
Drive Motor A Control Module Performance
P0A1B flags a self-test failure of the processor that controls drive motor A, usually inside the inverter. In GM hybrid tables (2016) it sets when the processor fails an inhibit path test at power-down, three or more times, proving it could not take the system to a safe state; in 2011 tables internal SPI, RAM or cache faults in 28 of 32 samples count. Both are Type A, MIL on the first trip. Land Rover sets P0A1B in the inverter of 2024-25 PHEVs at start-up, VW lists P0A1B00 for the ID.4 front drive. Toyota uses subtype P0A1B-1F on the 2023-24 Corolla Hybrid. Drive motor B is P0A1C. Expect a red loss-of-drive warning.
Possible causes
- Control software fault, several makers resolve it by reprogramming high
- Internal processor or memory fault in the inverter control board medium
- Weak 12 V supply during start-up or shutdown low
Symptoms
- Loss of drive warning and MIL
- Vehicle cannot be driven electrically or not at all
- Fault may vanish after a full sleep cycle while the code stays stored
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A1B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.