P0A1A
Generator Control Module
P0A1A reports a fault of the electronics that control the generator, either inside a hybrid inverter or in a belt starter-generator. Toyota lists P0A1A for the 2010-2015 Prius and 2012-2017 Prius V together with P0A94, P324E and P3004 as a malfunction inside the inverter assembly with converter; the repair can mean replacing the MG ECU, IPM transistors or the whole inverter. Audi stores P0A1A00 in the engine control unit of 2025 models with a Valeo 48 V starter-generator, paired with a 48 V system fault, and blames starter-generator software. CARB requires monitoring of the generator system. Effects range from a MIL to lost charging or no hybrid drive.
Possible causes
- Internal failure of the inverter or generator control electronics high
- Control software fault, fixed by an update where the maker provides one medium
- Supply, ground or bus connection to the module faulty low
Symptoms
- MIL and hybrid or charging warning on
- Battery no longer charged, start-stop or hybrid drive unavailable
- Vehicle may not reach ready state
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A1A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.