P0A16
Engine Mount A Control Circuit High
The module sees a higher voltage on the control circuit of engine mount A than it should for the commanded state, usually a short to a supply line or a failed actuator input. The mount can then no longer be switched or driven as intended. Ford lists P0A16 in its 2020 to 2023 gasoline OBD summary under the active mount circuit check, matured after about 5 seconds once the driver reports the fault; mount B uses P0AB8. On Honda's active control engine mounts, such as the 2008 Pilot V6, P0A16 belongs to the front mount actuator and P0AB8 to the rear one. A Ford patent shows the mounts are toggled between soft and firm, so a fault means either harsh idle or more movement. See P0A14 and P0A15.
Possible causes
- Control wire shorted to a battery or ignition supply high
- Mount actuator or solenoid failed with an open low side medium
- Driver stage in the engine or mount control unit damaged low
Symptoms
- Harsh idle or more engine movement on take-off
- Warning light, depending on manufacturer
- Vibration during cylinder deactivation
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0A16
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.