OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A0B

High Voltage System Interlock Circuit A Performance

The interlock loop A responds electrically, but its behaviour does not match what the module expects – for example a loop resistance outside the window, a signal that does not follow the commanded test pattern, or two modules on the same loop disagreeing. Mercedes-Benz logs P0A0B00 in the battery management system, the DC converter and the on-board charger of model line 243 when the vehicle will not start; its listed causes include oxidised interlock pins in the low-voltage connectors, twisted or chafed harnesses and bent pins on HV components. Patent literature explains why voltage-based loops are prone to false alarms from contact resistance and interference. Unlike P0A0C/P0A0D this is not a clear short. Expect the HV system to stay off.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 0B

Possible causes

  • Oxidised interlock pins in low-voltage connectors raising loop resistance high
  • Improperly connected HV connector or bent interlock pins on an HV component medium
  • Twisted or chafed interlock harness rubbing on the body medium
  • Faulty interlock driver or receiver in a control module low

Symptoms

  • Vehicle cannot be started
  • High-voltage system warning in the instrument cluster
  • Several modules store interlock codes at the same time

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0A0B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication