OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A05

Motor Electronics Coolant Pump A Control Circuit/Open

The electric pump that circulates coolant through the inverter, converter and drive motor loop is driven by a control line from the hybrid module. P0A05 means that line shows an open circuit or a fault the driver cannot classify further. No manufacturer documents P0A05 publicly. GM's Chevrolet Volt tables cover the same pump under P0CE9, set when the control line is open or shorted in 16 of 20 samples at 250 ms, Type B with MIL after two trips. CARB requires inverter cooling outputs to be checked, and Toyota patents describe how pump faults are told apart from other cooling faults. Low and high faults are P0A06 and P0A07; pump B is P0B38. Without circulation the electronics heat up quickly and power is cut.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 05

Possible causes

  • Pump connector loose or corroded, often from road splash at the low-mounted pump high
  • Broken control wire between module and pump medium
  • Failed electronics or open winding inside the pump medium
  • Blown pump fuse or missing supply, so the control input sees no load low

Symptoms

  • Hybrid system warning or check engine light
  • Electric drive power reduced, especially in warm weather or under load
  • Follow-up inverter overtemperature codes such as P0A93

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0A05

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication