P0A04
Motor Electronics Coolant Temperature Sensor A Circuit Intermittent
The temperature signal from the drive electronics coolant loop jumps or drops out for short moments, then returns to normal. Coolant temperature changes slowly, so a sudden step that the physics cannot explain points to a loose contact rather than a real temperature change. No manufacturer documents P0A04 publicly. GM's Two-Mode hybrids check the same sensor only for steady faults (P0A01 to P0A03), and a Nissan patent shows how an inverter coolant sensor is compared with the power element temperature to catch implausible readings. CARB requires such inverter cooling inputs to be monitored. The driver may see a warning light that comes and goes, with occasional power reduction.
Possible causes
- Loose or fretting terminal at the sensor or module connector high
- Partly broken wire that opens under vibration or heat medium
- Sensor with an internal intermittent contact low
Symptoms
- Warning light that appears and disappears
- Short, unexplained drops in electric drive power
- Stored code with no steady fault on re-test
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0A04
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.