P0A00
Motor Electronics Coolant Temperature Sensor A Circuit
General circuit fault on temperature sensor A in the separate coolant loop that cools the inverter and other drive electronics of a hybrid or electric vehicle. The module flags it when the sensor signal cannot be used at all, without a more specific low, high or plausibility verdict; those cases have their own codes P0A01 to P0A04. No manufacturer documents P0A00 publicly. GM's Two-Mode hybrid trucks monitor the same sensor only through P0A01 to P0A03, and CARB requires every input of the inverter thermal management to be checked for circuit faults. Without a valid reading the control unit usually limits electric drive power to protect the electronics.
Possible causes
- Corroded or loose connector at the sensor in the inverter coolant loop high
- Temperature sensor element failed medium
- Damaged signal or reference wire between sensor and hybrid control module medium
- Fault in the input stage of the hybrid or inverter control module low
Symptoms
- Hybrid system or check engine warning light
- Reduced electric drive power
- Inverter coolant pump or radiator fan running constantly as a precaution
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0A00
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.