P09A1
Shift Solenoid H Control Circuit/Open
Open circuit or general circuit fault in the drive of shift solenoid H, the eighth shift solenoid. Like P09A0 it is a late J2012 addition that older code lists still show as reserved. No manufacturer was found to document it. Genesis' 2017–2018 G80/G90, the only documented H user, reports its park-function on/off solenoid under P076A and P076D, and bulletin 21-AT-016HG has valve and electronic module replaced for those. Ford's summaries show what an open check looks like for solenoids A to E: a separate open code, run continuously with 0.5 to 5 s of electrical monitoring. CARB requires every transmission output to be checked for circuit continuity. P099D to P099F cover performance, low and high of solenoid H.
Possible causes
- Broken control wire or unplugged connector high
- Open solenoid coil medium
- Pin backed out of the connector housing low
Symptoms
- Check engine light
- Limp mode or missing gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P09A1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.