P099F
Shift Solenoid H Control Circuit High
High-voltage fault in the control circuit of shift solenoid H, from a short to voltage or, on pull-up driver designs, an open coil or wire. No manufacturer was found to document this code. Genesis' 2017–2018 G80/G90 shift-by-wire, the only documented H user, files its park-function on/off solenoid under P076A and P076D, and bulletin 21-AT-016HG fixes it by replacing valve and electronic module. For the high-side logic, Mitsubishi's six-speed is the nearest model: on solenoid G it treats 3.7 V or more for 0.5 s while commanded off as an open circuit. Ford's summaries give short to power its own code for each of solenoids A to E. CARB requires output circuit checks. P099E is the low side.
Possible causes
- Open control wire or connector high
- Control wire shorted to voltage medium
- Open solenoid coil medium
Symptoms
- Check engine light
- Limp mode or missing gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P099F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.