P099E
Shift Solenoid H Control Circuit Low
Low-voltage fault, typically a short to ground, in the control circuit of shift solenoid H. No manufacturer was found to document this code. A solenoid H exists only on transmissions with eight or more shift solenoids; Genesis' 2017–2018 G80/G90, the one documented H user, reports its park-function on/off solenoid under P076A and P076D. The closest documented logic is from lower letters: Mitsubishi detects a short on its solenoid G when the voltage stays below 3.7 V for 0.5 s while commanded on, and Ford's summaries store separate short-to-ground codes for solenoids A to E, checked continuously. CARB requires such circuit checks on transmission outputs. P099F is the high side, P09A1 the open circuit.
Possible causes
- Control wire shorted to ground high
- Shorted solenoid coil medium
- Transmission control module driver fault low
Symptoms
- Check engine light
- Limp mode or missing gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P099E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.