P099A
Shift Solenoid G Control Circuit Range/Performance
The drive circuit of shift solenoid G is electrically intact, but current or voltage feedback does not fit the command. No manufacturer was found to document this code. The two documented users of the G control circuit codes report only the hard faults: Mitsubishi's 2019 six-speed (low-reverse brake shift solenoid) uses P099B for a short and P099C for an open, and Nissan's RE0F11A CVT lists P099B/P099C. Hyundai and Genesis report their on/off solenoid G under P075A and P075D. The slot would follow the pattern FCA uses for solenoids 2 to 5 (P0975 to P0984, control circuit performance). CARB requires transmission outputs to be checked for function. Low and high are P099B/P099C, open P09A0.
Possible causes
- Solenoid coil resistance out of specification high
- High-resistance connector or harness contact medium
- Weak driver stage in the transmission control module low
Symptoms
- Warning light depending on calibration
- Harsh or missing shifts involving this solenoid
- Possible limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P099A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.