OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0998

Shift Solenoid F Control Circuit Low

Low-voltage fault, typically a short to ground, in the control circuit of shift solenoid F. Two makers document it. Nissan lists P0998 as shift solenoid F in bulletin NTB15-037 for the 2012–2017 Versa, Versa Note and Sentra with the RE0F11A CVT, whose two-speed auxiliary gearbox uses a low brake, a high clutch and a reverse brake; if the shop manual check points to the transaxle, the bulletin has only the control valve replaced. Mitsubishi's 2019 service manual for a six-speed automatic names P0998/P0999 the low clutch shift solenoid valve system and counts it among faults that can cause gear ratio errors. CARB requires transmission outputs to be checked for circuit faults. P0999 is high, P097F open.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 98

Possible causes

  • Solenoid or valve body (control valve) internal fault high
  • Control wire shorted to ground in harness or connector medium
  • Transmission control module driver fault low

Symptoms

  • Check engine light
  • Limp mode or loss of a gear range
  • Harsh engagement or flare when shifting

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0998

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication