P0995
Transmission Fluid Pressure Sensor/Switch F Circuit High
The signal of pressure sensor or switch F stays high: with a normally closed switch the contacts stay open, which looks like permanent pressure, or the wire is open or shorted to voltage. No manufacturer documents this use publicly. Hyundai/Genesis bulletins 17-AT-001-G and 21-AT-016HG list P0995 in their subject lines, but their tables pair it with Auto Shift Manual Mode Circuit (SBC), and 21-AT-016HG prints the DTC as P095500; this is a misprint for P0955 and does not count as a use of P0995. GM's matching switch E code P0990 is a Special No Trip without MIL; Saab's 9-4X text treats an open and a short to voltage alike as high. CARB requires such checks on transmission inputs. P0994 is the low side.
Possible causes
- Open signal wire or unplugged connector high
- Signal wire shorted to voltage medium
- Switch stuck open inside the valve body module medium
Symptoms
- Harsh or delayed shifts
- Shift adaptation frozen
- Possible limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0995
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.