OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0985

Shift Solenoid E Control Circuit Low

Low-voltage fault, usually a short to ground, in the control circuit of shift solenoid E. Ford lists it for SSE on the 5R110W and 6R140 and in its 2020–2023 gasoline and 2023 diesel summaries, beside P0770 for an open; for the 6R80 and 6F, whose SSE is the on/off multiplex solenoid, the 2012 text names only P0770. Saab's 2010 9-5 with the Aisin six-speed uses P0985 differently, for shift solenoid valve 1: the module sees the circuit reading on while it is commanded off, 100 ms five times in a row, Type A; it then turns all solenoids off and freezes adaptation. Voltage must be 10.2 to 15.5 V and the engine above 400 rpm. High side is P0986.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 85

Possible causes

  • Solenoid E control wire shorted to ground high
  • Internal short of solenoid E medium
  • Water or fluid in the transmission connector medium
  • Faulty driver stage in the transmission module low

Symptoms

  • MIL on after the fault is confirmed
  • All solenoids off, fixed fail-safe gear (Saab/Aisin)
  • Missing upper gears on Ford gearboxes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0985

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication