OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0982

Shift Solenoid D Control Circuit Low

Low-voltage fault, in practice a short to ground, in the control circuit of shift solenoid D. Ford is the documented user: its summaries list SSD with P0765 open, P0982 short to ground and P0983 short to power, checked continuously through the driver feedback within 0.5 to 5 s. Which clutch this hits depends on the gearbox. In the 6R80 and 6F, SSD is a variable force solenoid feeding CBLR or C456 via the SSE multiplex valve; in the 6R140 it drives CBLR alone. In the 2023 diesel summary SSD is fed from supply TSPC2 with SSB, the converter clutch and line pressure solenoid. GM's six-speed and Allison tables do not use P0982. Ferrari reuses it for an actuator 3 sensor reading too low.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 82

Possible causes

  • Solenoid D control wire shorted to ground high
  • Internal short in solenoid D or the main control assembly medium
  • Damaged internal lead frame or connector inside the transmission medium
  • Faulty driver in the powertrain or transmission module low

Symptoms

  • MIL on and default gear operation
  • No engine braking in first or no reverse, depending on gearbox
  • Harsh shifts into upper gears

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0982

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication