P0981
Shift Solenoid D Control Circuit Range/Performance
Range/performance fault in the drive circuit of shift solenoid D. GM's Allison tables end at solenoid C, and Ford checks SSD only with P0765, P0982 and P0983, so the large North American users skip it. Two codegenau sources exist. FCA's recall S55 (NHTSA 16V-529) covers about 323,400 vehicles with the 9-speed front-drive transaxle; with old TCM software, intermittent high resistance from weak crimps in the range sensor harness could set P0981 or its siblings, and the remedy is new software plus, if a code is present, a new harness. Ferrari's DCT bulletin uses P0981 for a missing signal from the actuator 3 position sensor. Low/high for D are P0982/P0983.
Possible causes
- Weak terminal crimps causing intermittent resistance (FCA recall S55) high
- Transmission software not yet updated by the recall medium
- Solenoid D coil resistance out of range medium
- Faulty driver stage in the control module low
Symptoms
- Unexpected shift to neutral while driving (FCA 9-speed)
- MIL or transmission warning on
- Default gear or harsh shifts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0981
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.