P097F
Shift Solenoid F Control Circuit/Open
Open-circuit fault in the drive circuit of shift solenoid F. It is the only code in its family for letter F, since J2012 has no range/performance, low or high codes for F in this block. No maker was found to document it. Hyundai's Genesis bulletin for the eight-speed (2017–2018 G80 and G90) shows how F is handled in practice: an electrical fault of shift control solenoid F (labelled 8LR) is reported under P2709 and fixed by replacing the solenoid. Other makers with six or more clutches use their own codes. A P097F would follow the CARB requirement to test every transmission output for circuit continuity, by analogy with GM's open tests for solenoids 1 to 3.
Possible causes
- Open coil of shift solenoid F high
- Loose or corroded terminal at the valve body connector medium
- Broken wire between module and solenoid F medium
- Faulty driver stage in the transmission control module low
Symptoms
- Warning light or MIL on
- Gears that need solenoid F unavailable
- Limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P097F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.