OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P097E

Shift Solenoid E Control Circuit/Open

Open-circuit fault in the drive circuit of shift solenoid E. No manufacturer was found that documents this code. Ford, the main user of an SSE, still reports an open SSE under P0770; its 2023 diesel summary pairs that with P0985 for ground and P0986 for power shorts, and powers SSE from supply TSPC1 together with SSA and SSC. In the 6R80 and 6F, SSE is an on/off solenoid that switches the multiplexing of SSD, while the 6R140 uses a variable force SSE for clutch C456. Without a public owner the code rests on the CARB demand for circuit continuity checks on transmission outputs and on GM's A to C pattern. Opens in shared supply wiring usually set P0657 first.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 7E

Possible causes

  • Open coil of shift solenoid E high
  • Poor contact at the solenoid E terminal or lead frame medium
  • Broken signal wire to solenoid E medium
  • Faulty driver stage in the control module low

Symptoms

  • Warning light or MIL on
  • Gears using solenoid E unavailable
  • Default gear operation

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P097E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication