P097D
Shift Solenoid D Control Circuit/Open
Open-circuit fault in the drive circuit of shift solenoid D. No maker documents this code publicly. GM's Allison tables that use P097A to P097C stop at shift solenoid 3, and Ford, which has a solenoid D in its 5R110W, 6R80, 6F and 6R140 gearboxes, reports an open SSD under the base code P0765, with P0982/P0983 for ground and power shorts. Any use would follow the CARB rule that every transmission output must be checked for lack of circuit continuity, plus the pattern of the A to C codes: a high-impedance reading confirmed by switching the driver. On Ford's 6R80 and 6F, SSD feeds either CBLR or C456 through a multiplex valve, so an open there would disturb first and upper gears alike.
Possible causes
- Open coil of shift solenoid D high
- Disconnected or corroded terminal in the solenoid D circuit medium
- Broken wire in the transmission harness medium
- Faulty driver in the control module low
Symptoms
- Warning light or MIL on
- Missing gears that depend on solenoid D
- Limp mode in a fixed gear
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P097D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.