P097B
Shift Solenoid B Control Circuit/Open
Open-circuit fault in the drive circuit of shift solenoid B. Public use is again limited to GM's Allison 1000 six-speed in heavy-duty trucks, where the 2022 to 2025 tables label it Shift Solenoid 2 Control Circuit Open. SS2 shares high-side driver 2 with SS1 and SS3, so the open test only runs while that supply is on and free of P2669, P2670 or P2671. It confirms an open by switching the low-side driver off and needs three samples, 120 ms, MIL after one trip. Allison's 2007 table filed the same check as P0975, the 2016 table under P0976. Ford reports an open SSB as P0755, GM six-speeds as P0977. Low/high are P0976/P0977.
Possible causes
- Open coil of shift solenoid 2/B high
- Loose or corroded terminal on the solenoid B circuit high
- Wire broken by vibration or heat near the transmission medium
- Faulty driver stage in the control module low
Symptoms
- MIL on after one faulty trip
- Default gear operation, some ranges unavailable
- Harsh or missing shifts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P097B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.