OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0979

Shift Solenoid C Control Circuit Low

Low-voltage fault, usually a short to ground, in the control circuit of shift solenoid C. GM uses it mainly on the Allison 1000 six-speed of its heavy pickups and chassis cabs: in 2016 a ground short of 0.22 ohm or less, stricter than the 0.42 ohm for SS1 and SS2, or an open of 200 kOhm or more counts after 10 samples (250 ms, Type A). From 2022 the open moves to P097C and P0979 needs an intrusive low-side test (120 ms, MIL after one trip). The Allison PS3 pressure switch test (P0872) also points to P0979 when its fault is electrical. Ford uses it for SSC short to ground beside P0760 open; on 6R80 and 6F, SSC drives the CB26 clutch. High side is P0980.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 79

Possible causes

  • Solenoid C control wire shorted to ground high
  • Internal short of solenoid C inside the valve body medium
  • Open coil on GM 2016 Allison calibrations, which report opens under this code medium
  • Faulty low-side driver in the control module low

Symptoms

  • MIL on after the first faulty trip
  • Transmission holds a default gear
  • Rough or delayed shifts involving the affected clutch

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0979

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication