P0976
Shift Solenoid B Control Circuit Low
Low-voltage fault, normally a ground short, in the control circuit of shift solenoid B. On GM six-speeds SS B is the mode 3 multiplex valve; the 2016 table sets P0976 after 1.2 of 1.5 s without lighting the MIL, while the Saab 9-4X 6T70 version needs 2 s, is Type B and raises line pressure. Ford uses it for SSB short to ground, with P0755 for an open; on the 2023 Super Duty diesel SSB is fed by solenoid supply TSPC2, so a P2669 supply fault disables this check. GM's Allison 1000 merges ground short and open into it in 2016, but from 2022 reports opens as P097B and keeps P0976 for ground faults found by an intrusive test (120 ms, MIL after one trip). High side is P0977.
Possible causes
- Solenoid B control wire shorted to ground or housing high
- Internal short in solenoid B or its valve body assembly medium
- Moisture or debris bridging pins at the connector medium
- Faulty driver in the transmission control module low
Symptoms
- Warning light or stored code, on some GM six-speeds without MIL
- Firm shifts due to raised line pressure
- Gears missing or limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0976
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG03 Transmission Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2023/23OBDG06B.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- saabwisonline.com/9-4x/2011/4-transmission/automatic-transmission-6t70-6t75/fault-diagnosis-diagnostic-trouble-codes/dtc-p0976-or-p0977