OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0973

Shift Solenoid A Control Circuit Low

Low-voltage fault in the control circuit of shift solenoid A, usually a short to ground. Ford lists it as SSA short to ground beside P0750 (open) for the 5R110W, 6R80, 6F and 6R140, checked by a driver feedback line within 0.5 to 5 s. GM six-speeds (6L/6T) call SS A the mode 2 solenoid and set P0973 after 1.2 of 1.5 s, MIL after one trip. The Saab 9-4X 6T70 needs 2 s, Type A, then only reverse and 5th remain. GM's 2016 Allison 1000 table folds ground short (0.42 ohm or less) and open (200 kOhm or more) into this code over 10 counts. Saab's Aisin gearbox in the 9-5 (2010) maps it to shift solenoid valve 2. High side is P0974.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 73

Possible causes

  • Control wire to solenoid A chafed through and shorted to ground high
  • Internal short in solenoid A or the control solenoid assembly medium
  • Fluid or metal debris bridging pins at the transmission connector medium
  • Faulty low-side driver in the transmission or powertrain module low

Symptoms

  • MIL on after the first faulty trip on many vehicles
  • Limp mode with only a few gears, often reverse plus one forward gear
  • Harsh engagements due to maximum line pressure
  • Torque converter lockup and manual shifting disabled

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0973

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication