OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0967

Pressure Control Solenoid B Control Circuit High

Pressure control solenoid B circuit high: a short to voltage, and on GM six-speeds also an open, since they have no P0964. For the Saab 9-4X 6T70, where B is clutch pressure solenoid 2 for the 3-5-reverse clutch, the module needs 1 s, stores a Type A code and limits the transmission to reverse and 3rd gear at maximum line pressure; GM's 2018 six-speed table uses 0.3 s and one trip. GM's 8-speed (clutch 2), the 9- and 10-speeds, Allison 1000 (power short within 75 ms) and GM's dual-clutch gearbox (even-clutch valve) report the same fault on their solenoid B. Ford does not use it. Siblings: P0964 open, P0966 low, P0965 performance. Repairs usually involve the solenoid body or valve body module.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 67

Possible causes

  • Open coil or poor connection (reported as high on GM six-speeds) high
  • Control wire shorted to a supply voltage medium
  • Damaged or contaminated transmission connector medium
  • Faulty output stage in the control module low

Symptoms

  • MIL on, limp mode in a fixed gear
  • Harsh engagements at maximum line pressure
  • Dual-clutch gearbox loses the even gears

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0967

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication