OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0961

Pressure Control Solenoid A Control Circuit Range/Performance

Performance fault of pressure control solenoid A: the circuit is electrically intact, but the solenoid does not behave as commanded. On GM's six-speeds, where A is the line pressure solenoid, the Saab 9-4X 6T70 sets it when measured and commanded current differ for 5 s, GM's 2018 table after 4.4 of 5 s; both Type B, two trips. Allison 1000 flags a current error of 0.5 A or more in 40 of 80 samples (Type A). Ford's 2023 diesel summary lists it as a PC A current range fault. In GM's CVT, A feeds the secondary pulley: a pressure error above 500 kPa steady or 1,500 kPa transient, confirmed by a ratio error, sets it after 5 s. Electrical faults are P0960, P0962 and P0963. The module usually commands maximum line pressure and freezes adaptations.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 61

Possible causes

  • Solenoid with internal electrical or mechanical fault, current no longer follows the command high
  • Debris or varnish in the fluid sticking the solenoid or regulator valve medium
  • High resistance at connector or pass-through distorting the current medium
  • Low fluid level causing pressure errors (CVT pulley monitor) low

Symptoms

  • Harsh or erratic shifts
  • MIL or transmission warning after the second drive
  • Slipping or ratio flare on CVT applications

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0961

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication