P095D
Gear Shift Position Circuit C High
Shift position sensor C of an automated manual gearbox delivers a voltage above its permitted window. This usually points to a signal wire shorted to the supply, a broken sensor ground or, with a pulled-up input, an interrupted signal line. Since no real shift position produces such a value, the module can set the code without cross-checking other channels. No manufacturer documents this code publicly. A Nissan/Aichi patent describes shift stroke sensors as feedback for gear engagement, an Aisin AI patent how control continues when one of them fails. CARB requires circuit checks on such inputs. P095C is the low counterpart, P095A the general and P095B the plausibility fault; P0917 and P091D are the high faults of A and B.
Possible causes
- Signal wire of sensor C shorted to the 5 V supply or battery voltage high
- Open ground circuit of the sensor medium
- Internally failed shift position sensor C medium
Symptoms
- Transmission or engine warning light on
- Fallback mode with restricted gears
- Jerky or aborted gear changes
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P095D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.