P095B
Gear Shift Position Circuit C Range/Performance
Plausibility fault of the shift position signal on circuit C of an automated manual gearbox. The voltage is electrically acceptable, but the value does not fit: it contradicts the other position channels, stays put while the shift actuator moves, or misses the learned gear positions. No manufacturer documents this code publicly. A Nissan/Aichi patent points out that sensor mountings on shift parts can give way under vibration and distort the reading; an Aisin AI patent explains how control carries on when a stroke sensor can no longer be trusted. CARB requires rationality checks on such inputs. P095A, P095C and P095D are the electrical faults of circuit C, P0915 and P091B the same check on A and B.
Possible causes
- Worn or drifting shift position sensor C disagreeing with the other channels high
- Bent sensor bracket or displaced magnet on the shift rail medium
- Gear positions not relearned after actuator or module replacement medium
- Increased contact resistance in the sensor circuit low
Symptoms
- Transmission warning light on
- Harsh or aborted gear changes
- Fallback mode with fewer available gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P095B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.