P0959
Auto Shift Manual Mode Circuit Intermittent
The signal reporting the selector lever in the manual gate drops out or toggles briefly while the lever is not moved, so the transmission control switches between manual and automatic mode on its own. The voltage is not stuck out of range as with P0957 or P0958 but jumps. Loose connector pins at the lever, a harness that flexes with the shifter or a worn microswitch are typical. A Hyundai patent shows such a microswitch actuated by the lever's sideways movement, a Nissan patent the two-contact mode switch. No manufacturer documents this exact code publicly; CARB requires circuit checks. P0955 is the general fault, P0954 the intermittent fault of the up/down circuit.
Possible causes
- Loose pins in the selector lever connector high
- Worn or bouncing mode microswitch medium
- Harness damaged where it moves with the lever medium
Symptoms
- Manual mode switches on or off by itself
- Gear display flickers between D and manual gear
- Fault often appears on rough roads
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0959
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.