P0958
Auto Shift Manual Mode Circuit High
The manual mode signal from the selector lever reads above its expected range. Possible causes are a short to supply voltage or, with an internally pulled-up input, an open circuit or missing switch ground that keeps the line high. A Nissan patent explains how two separately wired contacts let the control unit recognise a break in the manual mode switch, and a Hyundai patent shows the lever microswitch that reports the change from D to M. No manufacturer documents this exact code publicly; Hyundai's mode fault is only documented as P0955. CARB requires circuit checks on such inputs. P0957 is the low side, P0959 the intermittent variant. Usually the gearbox stays in automatic mode.
Possible causes
- Broken mode signal wire or disconnected shifter plug high
- Missing ground at the mode switch medium
- Mode signal shorted to a voltage-carrying wire medium
Symptoms
- Manual gate has no effect, gearbox stays in automatic mode
- Warning lamp depending on manufacturer
- No manual gear shown on the display
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0958
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.