P0952
Auto Shift Manual Control Circuit Low
The control unit sees the voltage on the manual up/down request circuit below its expected window, typically a signal wire shorted to ground or a switch stuck in the grounded state. In many tip gates the moving contact switches to ground, as a Nissan patent shows, so a short to ground can mimic a permanently held request; a Volkswagen patent describes checking the Hall tip sensors for shorts and breaks while the lever is in P or R. No manufacturer documents this exact code publicly; CARB requires circuit checks on such inputs. P0953 is the high counterpart, P0950 the general and P0951 the plausibility fault. In practice manual shifting is locked out while D keeps shifting automatically.
Possible causes
- Signal wire of the up/down circuit chafed through and shorted to ground high
- Tip switch stuck in the closed position medium
- Moisture or spilled drink in the shifter creating a leakage path to ground medium
- Low supply voltage to a Hall-type tip sensor low
Symptoms
- Manual tip shifting inoperative
- Gear indicator shows no manual gear or a warning message
- Normal automatic driving in D still possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0952
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.