P0950
Auto Shift Manual Control Circuit
General electrical fault in the circuit that carries the driver's manual up and down requests to the transmission control, as used by tip-shift gates on automatics and by automated manual gearboxes. A Chrysler patent shows the classic design: a transverse gate beside the drive positions with a proximity switch that signals upshift on one side and downshift on the other. No manufacturer documents this exact code publicly. The module typically checks the switch signals for states that cannot occur. P0951 to P0954 are the range, low, high and intermittent faults, P0955 onward the mode select circuit. Usually manual shifting is disabled while normal automatic driving remains available; MIL use varies.
Possible causes
- Failed up/down switch or sensor in the selector lever or paddles high
- Damaged wiring or corroded connector at the shifter (e.g. after spilled liquid) medium
- Clockspring or steering column wiring fault on paddle-shift vehicles low
Symptoms
- Manual or tip shifting does not respond
- Gear display or warning message
- Automatic mode still works normally
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0950
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.