OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P094C

Hydraulic Pump Performance/Stuck Off

The pump is commanded on but does not deliver: it does not turn, turns too slowly or produces too little pressure. The module judges this from pressure or speed feedback. No manufacturer documents this exact code publicly. Mercedes reports a comparable condition of the electric auxiliary oil pump on the 722.9 automatic under P0944; its test plan checks connector and fuse, supply voltage, CAN lines and software, then a check valve in the converter housing, before the pump is replaced. Hyundai lists a stuck high-flow pump on its 8-speed DCT as P193E71. CARB requires functional checks on outputs. P094B is the opposite fault, P094A the driver, P0944 the pressure loss of the whole unit.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 4C

Possible causes

  • Air in the pump after service or a suction leak high
  • Seized or failed pump motor medium
  • Blocked strainer or leaking check valve medium
  • Supply or relay fault stopping the pump low

Symptoms

  • Warning light on
  • Engine restarts at once or stop-start not available
  • Delayed engagement or lost drive

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P094C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication