P094A
Hydraulic Pump Driver Performance
Concerns the electronic driver that powers the motor of a hydraulic or electric oil pump, often a separate pump controller. The driver reports, or the module infers, that it cannot deliver the commanded speed or current although the circuit is not open or shorted. No manufacturer documents this exact code publicly. Hyundai shows what such a driver monitors on its wet 8-speed DCT pumps: overcurrent, current and Hall sensor faults and internal faults, filed under its own P193D and P1C2E codes. Mercedes reports an internal fault of the 722.9 auxiliary oil pump under P0944 instead. CARB requires functional checks on outputs. P094B and P094C are stuck pump faults, P094D overheating, P094E supply; P0C29 is the equivalent for auxiliary fluid pumps of automatics.
Possible causes
- Internal fault of the pump controller or driver stage high
- Pump motor drawing excess current (worn bearings, fluid in motor) medium
- High resistance in supply or ground of the driver medium
Symptoms
- Warning light on
- Auto stop-start disabled
- Delayed engagement or slower shifts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P094A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.