P0944
Hydraulic Pressure Unit Loss of Pressure
The pump runs but the expected hydraulic pressure does not build or collapses. Stellantis names it Loss of Hydraulic Pump Prime: a 2023 STAR case lists it with P0868 and a slow engagement after the vehicle has stood, both set as the only transmission codes with the MIL on, and the fix was a new transmission; an FCA defect file from 2015 also shows it beside line pressure low. Mercedes uses P0944 on the 722.9 automatic with electric auxiliary oil pump for stop-start, as internal fault of that pump; stop-start stops working, and a leaking check valve between converter housing and pump is one cause. Ferrari reads it on its DCT as no system pressure signal with pressure loss. P0943 covers short cycles, P0868 low fluid pressure.
Possible causes
- Pump loses prime (air drawn in through filter, seal or strainer pipe) high
- Blocked oil strainer or suction tube medium
- Worn or failed pump (mechanical or electric) medium
- Leaking check valve or internal leak in the valve body low
Symptoms
- Check engine or transmission warning light on
- Slow engagement after the vehicle has been parked
- Auto stop-start not available or engine restarts at once
- Slipping, no drive or limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0944
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.