P0941
Hydraulic Oil Temperature Sensor Circuit Intermittent
The hydraulic oil temperature signal jumps or drops out briefly, too short or irregular for a lasting low or high fault. Since fluid temperature changes slowly, a sudden step is a clear sign of an electrical problem rather than a real temperature change. No manufacturer documents this code publicly. Ferrari's DCT bulletin shows the related sensor at the radiator outlet and gearbox inlet, with its steady faults under P0938 to P0940. CARB requires circuit checks on transmission sensors. P0937 is the general circuit fault, P0938 plausibility, P0939 and P0940 low and high. For the driver this means a warning that may come and go and shift quality that changes from one moment to the next.
Possible causes
- Loose contact at the sensor connector under vibration or heat high
- Chafed wiring near hot gearbox or cooler parts medium
- Sensor with an intermittent internal fault low
Symptoms
- Warning light comes and goes
- Shift quality varies unpredictably
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0941
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.