OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P093D

Hydraulic Accumulator Solenoid Performance

The accumulator solenoid circuit is electrically sound, but the accumulator system does not deliver the expected hydraulic result. No manufacturer documents P093D publicly. GM's comparable P171D on the 9-speed transmission watches turbine speed during an engine auto-start: if it exceeds a predicted value because holding clutches slip from too little stored pressure, it counts a failure, enabled between 0 and 110 °C transmission fluid temperature, Type B. Gears Magazine names a solenoid stuck open or closed, a leaking accumulator piston, clutch or valve body leakage and misplaced check balls as causes. P093A to P093C are the electrical faults. Stop-start is disabled and the restart may feel like a bang.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 3D

Possible causes

  • Accumulator solenoid stuck open (drains) or closed (no fill) high
  • Accumulator piston or bore leaking medium
  • Leakage at clutch seals or a worn valve body medium
  • Missing or misplaced check ball after a rebuild low

Symptoms

  • Engine stop-start disabled
  • Lurch or bang when the engine restarts
  • Firm shifts with adaptive learning frozen

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P093D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication