OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0938

Hydraulic Oil Temperature Sensor Range/Performance

By J2012 wording the hydraulic oil temperature reading is electrically valid but implausible, for example frozen, rising too slowly after a cold start or disagreeing with other temperature values. Ferrari uses P0938 on its DCT for the radiator outlet and gearbox inlet oil temperature sensor, but describes it in its bulletin as no signal, an electrical fault rather than a plausibility check; the code is read in the NCR gearbox ECU. CARB asks for rationality checks on temperature inputs. P0937 is the general circuit fault, P0939 and P0940 the low and high faults, P0941 intermittent. A wrong temperature value leads to poorly matched clutch and shift pressures and may limit the cooling strategy.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 38

Possible causes

  • Temperature sensor drifting or reacting sluggishly high
  • Signal lost through connector or wiring fault (as in Ferrari's no-signal case) medium
  • Real temperature anomaly from a cooler or thermostat fault low

Symptoms

  • Gearbox warning light on
  • Shift and clutch quality inconsistent with operating temperature

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0938

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication