P0937
Hydraulic Oil Temperature Sensor Circuit
General electrical fault in the circuit of the temperature sensor for the hydraulic fluid of an automated gearbox, without a clear low or high pattern. No manufacturer documents this exact code publicly. Ferrari shows where such a sensor sits: its DCT carries a radiator outlet and gearbox inlet oil temperature sensor reported under P0938 to P0940 in the NCR gearbox ECU. The control needs this value to correct pressure and clutch fill for viscosity. CARB requires circuit checks on transmission sensors. P0938 is the plausibility fault, P0939 and P0940 low and high, P0941 intermittent; P0711 to P0713 cover the main transmission fluid temperature sensor. Shift quality may suffer and a warning appears.
Possible causes
- Connector at the temperature sensor loose, corroded or oil-soaked high
- Damaged sensor wiring near the gearbox or cooler lines medium
- Temperature sensor failed medium
Symptoms
- Gearbox warning light on
- Rougher shifts or clutch engagement, especially when cold
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0937
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.