P092D
Gear Shift Lock Solenoid/Actuator Control Circuit B High
The module sees a higher voltage on shift lock circuit B than the commanded state allows, such as a short to supply or, with a low-side driver, an open coil. No manufacturer documents this code publicly. The documented counterpart on circuit A is FCA P0931 in recall 16V-249, where a badly crimped BTSI solenoid terminal on 2016 Grand Cherokees set the high fault and kept the lever in Park. GHSP patents show that a shifter may carry a second lock solenoid, so circuit B can be a separate lock. CARB requires circuit fault checks on outputs, with an exemption path for safety-only systems. P092C is the low, P092A the open fault of circuit B; P0931 is the same fault on circuit A.
Possible causes
- Circuit B wire shorted to a supply voltage high
- Poor crimp or loose terminal at the second lock solenoid medium
- Open coil in the second lock solenoid medium
Symptoms
- Lever will not release from its locked position
- Fault appears intermittently with vibration
- Warning message about the shifter or transmission
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P092D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.