P092C
Gear Shift Lock Solenoid/Actuator Control Circuit B Low
The voltage on shift lock control circuit B is lower than expected, usually because the wire or the solenoid has a path to ground. No manufacturer documents this code publicly or names the lock behind circuit B. GHSP patents describe shifters with a second solenoid next to the Park lock, for example one that holds the lever in Neutral unless speed is low and the brake is applied. CARB requires output circuits to be checked for shorts but allows safety-only systems to be left out. P092D is the high fault, P092A the open and P092B the plausibility fault of circuit B; P0930 is the low fault on circuit A. A shorted lock circuit can leave the lever locked or let it move without the brake.
Possible causes
- Circuit B wire chafed to ground near the shifter high
- Shorted turns in the second lock solenoid medium
- Liquid spilled into the shifter causing leakage to ground low
Symptoms
- Lever locked in a position despite brake applied
- Lock does not engage, lever moves without brake
- Warning message about the shifter
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P092C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.