P092B
Gear Shift Lock Solenoid/Actuator Control Circuit B Range/Performance
Set when the actuator on shift lock circuit B is wired correctly but does not reach or report the commanded lock or release state. No manufacturer documents this code publicly. The closest documented case is Ford P0929 on circuit A, where the gear shift module logs that the commanded position was not reached and the cure is new GSM software or a new module. CARB asks for a functional check of output components where feasible. GHSP patents show that a shifter can carry a second lock solenoid, for instance a Neutral lock. P092A, P092C and P092D are the open, low and high faults of circuit B, P0929 the matching fault on circuit A. The lever may stay locked, or the lock may engage late.
Possible causes
- Lock pin or actuator binding inside the shifter assembly high
- Shifter module software misjudging the actuator response medium
- Weak battery or poor supply leaving the solenoid too little force low
Symptoms
- Lever releases late or only after several tries
- Lever stays locked in one position
- Transmission or wrench warning lamp on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P092B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.